Raised Solar Road Stud

+ Free Shipping
Body material Hi-pressure Casting Aluminium alloy
Power supply Solar panel(Monocrystalline 2.5V /0.2W)
Battery NI-MH1.2V/800MAH or Super capacitor(120F)
LED Ultra bright diameter 5mm; 6pcs(double side)
LED color Red,Yellow,Green,Blue,White
working mode Recharging at day and working automatically at night
Flashing mode Blinking or constant(flashing frequency 2Hz, also can be made according to your requirements)
Working hours Fully charge at 8hours and can working 120hours continuously
Water proof IP68
Visual distance >800m
Life span >3years
Load capacity >20T
Size L123*W133*H22mm+55mm   (L4.84″*W5.24″*H0.87″+2.17″)
Working temperature -40~85 °C
Package: 1pcs/box; 45pcs/ctn; weight: 31kgs; Carton size: 66.5*44*28cm
(1pcs/box; 45pcs/ctn; weight: 68.34bs; Carton size: 26.18″*17.32″*11.02″)

 AGAMERO Raised Solar Road Stud – Reducing Accidents & Enhancing Road Safety


AGAMERO Solar Road Stud, also known as cat eyes, is a solar-powered lighting system that helps reduce accidents at regional rail crossings, intersections, and provides guidance and hazard warning to drivers in darkness and bad weather. This document explains the working principle of solar road stud lights, installation methods, recommended spacing, and features.


Working Principle of Solar Road Stud Light:
During the day, solar panels absorb sunlight and convert it into electrical energy, which is stored in energy storage devices. At night, the electrical energy in the energy storage devices is automatically converted into light energy and emitted by LEDs. The bright flashing LEDs are highly effective at getting the attention of drivers much earlier than conventional road studs.

Installation Method of Raised Solar Road Stud:


  1. To install, carefully mark the distance between each solar road stud light, and use a proper tool such as Core Drill to drill a Φ35mm and 55mm deep hole.
  2. Remove all debris from the hole, pour epoxy into the holes per manufacturer’s instruction, and verify that the installation hole is straight.
  3. Set the lighting surface of the solar road stud to the desired viewing angle, and verify that the epoxy is evenly adhering to the installation hole and solar marker shaft.
  4. After curing the LED solar road stud for 6-8 hours, remove the installation of the isolation facility.
Recommended Spacing:

The recommended spacing between each solar road stud varies based on its application. For highways and expressways, it is 7-8 yards (5-6 meters). For dangerous entrances and exits, it is 4-5 yards (2-3 meters), and for access or exit ways for hospitals, parking lots, etc., it is 0.5-3 yards (0.5-2 meters). The spacing between each solar stud also depends on your actual application requirements, and the above values are for reference only.


AGAMERO Solar Road Stud has a super power capacity, longer life (more than 10 years), and works on recharging during the day and working automatically.

It has a working period of full recharging for 180 hours for flashing and 40 hours for steady in fog or rainy days. It is suitable for edge lines of roads and pavements, accepts OEM/ODM, and can work for more than 3 years normally.


With more than 5 years of factory experience, solar powered cats eyes produced by our company have a competitive cats eye road markers price and offer more choice to the global traffic road safety market and trustworthy partners all over the world.


There are no reviews yet.

Be the first to review “Raised Solar Road Stud”

Your email address will not be published. Required fields are marked *

Shopping Basket

You cannot copy content of this page